|
EM1230
手持式示波器, EM1230 示波器 功能簡介
本示波表是一款集25MHz數字存儲示波器和6000計數的真有效值數字萬用表功能為一體的適合現場測試、維護、檢修使用的多功能手持式工具儀表.
● 2通道數字存儲示波器,100MSa/s的實時采樣率,25MHz的實時帶寬. ● 6000計數的真有效值數字萬用表. ● 自動跟蹤測量: 根據外部輸入信號全自動跟蹤調節垂直幅度\水平時基檔位和觸發,無需人工干預. ● 大動態示波測量范圍 :無需擴展探頭,直接測量范圍可從10mV/div至500V/div. ● 多參數屏幕顯示,使用者可根據需要選擇有效值、峰峰值、平均值、頻率、周期等10多種參數. ● 單、雙兩種光標測量模式選擇. ● 320x240點TFT液晶顯示,內置電池供電,交直流兩用. ● 記錄儀功能, 可連續跟蹤記錄長達24小時的事件. ● 標配USB接口、通過PC軟件可方便的與計算機通信,進行數據分析和測試結果歸檔.
規格參數
Horizontal Bandwidth: DC-25MHz (-3dB) Channel Number: 2 Raise Time: 14 ns Sampling Rate: 100MSa/s Horizontal Sensitivity: 10ns/div - 5s/div,With 1-2-5 Steps Horizontal Precision: 0.01% + 1 Pixel
Vertical Vertical Sensitivity: 10mV/div - 500V/div,With 1-2-5 Steps Vertical Precision: ± (3% + 1 pixel) Vertical Resolution: 8 Bit Maximum Input Voltage: DC or AC 600Vrms Coupling: AC,DC Input impedance: 1MΩ≤20pF
Trigger Trigger Source: CHA,CHB,External trigger Trigger Mode: Normal, Auto, Single Trigger Sensitivity: ≤1.0div Trigger slope: Rising or falling edge of waveform Trigger Coupling: AC,DC
DC(V): 600mV/ 6V/ 60V/ 600V/1000V AC(V): 600mV/ 6V/ 60V/ 600V/1000V DC(A): Reference the accuracy of current probe(optional) AC(A): Reference the accuracy of current probe(optional) OHM: 600Ω/6KΩ/60KΩ/6006KΩ/6MΩ/60MΩ CAP: 6nF\60nF\600nF\6uF\60uF\600uF\6mF Diode: ≤2V On/Off Test: Lower5 Ω,Beep
Communication: USB PC Display: 320×240 pixels; LED backlight Dimensions: 212×121×50mm Weight: Approx. 700g
附件
|